Carlon round floor boxes give you the same cost-saving advantages over metal boxes as our rectangular boxes. By letting you combine power, data and communications in the same box, you can dramatically reduce your installation time and cost compared to other non-metallic boxes. In addition, multi-use covers mean fewer SKUs to deal with and greater jobsite flexibility to increase your savings further.

Flush floor mount, for duplex or GFCI receptacle, used with Carlon floor box E971FB. Solid brass cover, plastic adapter ring, gasket and everything needed for installation is included. (Receptacle sold separately).

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.

Four 1/2 in conduit knockouts (sides). Four 1/2 in conduit knockouts (bottom). #bracket. Used in the installation of ceiling or wall lighting fixtures or as a junction box. 1-1/2 in deep, 15.5 cu-in capacity. Not designed for ceiling fan support. 50 lb maximum recommended static load. Acceptable for use in 2 hrs fire rated walls. UL listed. UPC bar code.

For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 4-9/16 in W. Multi-lingual instructions. UL listed. NEMA 3R Rated.

RACO HUBBELL OUTLET BOX 1G

RACO W/PROOF BOX 1G 3X1/2 WHT

For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.

For most residential wiring.

Cast cover for use whenever weatherproof protection is required for an outdoor receptacle. Heavy-duty metallic construction will last the life of the installation. Self-closing lids assure weatherproof protection when the receptacle is not in use. Comes with installation instructions, gasket and hardware. UL, CSA Compliant.

For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.

Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53 in H x 2.10 in W x 3-1/4 in D.

Nonmetallic threaded switch box with five 1/2 in threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4 in Dia. 13.5 cu-in capacity.

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. Shrink wrapped.

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #961H). Other head sizes available are 1/2 in (Model #960) and 1 in (Model #962). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.