44602-C HEX CAP M16X2.0X60
44602-D HEX CAP M16X2.0X70
FOR INDUSTRIAL APPLICATIONS: Used to make up long rod assemblies from shorter lengths of rods
SIMILAR FUNCTION TO HEX NUTS: Coupling nuts are elongated hex nuts designed to connect rather than finish
PART OF A COMPLETE FASTENING SOLUTION: Use with bolts, threaded rods, or washers of the same thread size and finish
CORROSION-RESISTANT FINISH: Zinc plating offers moderate protection against rust and corrosion
BUILT FOR METRIC SYSTEM: Ideal for applications involving metric measurements
These zinc-plated metric coupling nuts feature coarse M10-1.50 thread
One (1) refill box per sellable unit
10 pieces per retail package
GREAT FOR SHAFT FASTENING: Designed to hold components securely in place on a shaft
ENSURES A SNUG FIT: Retaining rings fit into grooves in a shaft for a snug fit
SIMPLE INSTALLATION: Parts install easily using common pliers
STRONG, STURDY, RELIABLE: Made with high-quality steel
CORROSION-RESISTANT: Material offers strong resistance to rust and corrosion
BUILT FOR METRIC SYSTEM: Ideal for applications involving metric measurements
Metric external retaining ring variant sized M10 in diameter
One (1) refill box per sellable unit
20 pieces per retail package
Don't forget the nuts an
KEEPER? engineered an EPDM rubber compound to take rubber straps to the next level of strength and durability. Unlike straps manufactured from cheap, inferior rubber, these straps will not crack, rot or lose rebound qualities, even if used infrequently. This rubber remains non-brittle in temperatures as low as -40 deg F and is not damaged by sunlight, ozone or demanding weather. Tough zinc-plated, steel hooks resist corrosion and do not bend, break or rust as easily as other straps, making KEEPER? EPDM rubber straps the excellent choice whenever you need a reliable strap.
Phillips 46455 Truss-Head Metric Machine Screws M6-1.00 x 12mm
IDEAL FOR METAL FASTENING: Machine screws are engineered for metal-on-metal fastening applications
CORROSION-RESISTANT FINISH: Zinc plating offers moderate protection against rust and corrosion
INSTALLS EASILY: Fasten with screwdriver to reduce risk of over-tightening
PRE-DRILLING RECOMMENDED: For installation, drill a hole in the material that matches the diameter of the bolt, and install with a nut of similar size and finish
STRONG COARSE METRIC SCREW THREAD: Sturdier thread than wood screws, made finer and more precisely
These Phillips-drive, truss-head, metric machine screws feature coarse M6-1.00 thread and measure 16mm in length
One (1) refill box per sellable unit
10 pieces per retail package
Phillips 46459 Truss-Head Metric Machine Screws M6-1.00 x 30mm
Simpson Strong-Tie Retrofit Bolt, Series: RFB, 5/8 in dia, 5 in OAL, Low Carbon Steel, Hot Dipped Galvanized, UNC, 2220 lb Shear Strength, 1390 lb TensileRFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry. Each end of the threaded rod is stamped with rod length in inches and our inNo-Equal in symbol for easy identification after installation.
FOR MECHANICAL APPLICATIONS: Ideal for use in confined areas where the head needs to be flush or below the surface
HEX SOCKET DRIVE: Prevents slippage during installation
CORROSION-RESISTANT FINISH: Zinc finish combines lasting durability with strong corrosion protection
PRE-DRILLING RECOMMENDED: For installation, drill a hole in the material that matches the diameter of the bolt
These socket set screws feature #6-40 SAE fine screw thread, measure 3/16" in length, and install easily with a 1/16" hex wrench
One (1) refill box per sellable unit
24 pieces per retail package
5 lb, 2" x #9, power pro stainless exterior screws, self drilling point star borefast thread 2000 hr salt spray, knurled section prevents splitting,
8X1-3/4 DUAL TORQ GALV DECK SCRW
96mm Pull Newport Matte Black