The QEP 1/16 in. Hard-Style Tile Spacers offer the choice of a traditional vertical tombstone-style or inset leave-in installation method. QEP Leave-In Spacers are constructed of hard plastic, so they will not compress when used with marble, stone and large format tile. These spacers feature a lower height profile, so they can easily be covered when grouting. When used in tombstone style, these hard tile spacers can also be easily removed and reused.
For aligning all floor and wall tiles
Hard plastic maintains grout joint width for consistent tile spacing
Produces a 1/16 in. (1.5 mm) grout joint
Will not compress when setting marble, granite, stone and large format tile
For single use when used as a leave-in spacer
Reusable when used as a traditional spacer
Sold as a pack of 300
Longer leg length for easier installation
QEP 1/16 in. Horseshoe Shim Tile Spacers are ideal for spacing and aligning marble, granite, stone, and large format tile installations. They are engineered to produce a 1/16 in. (1.5mm) grout joint, and to quickly and easily space and align horizontal and vertical tile. They are injection molded for dimensional accuracy and do not compress under heavy loads, making them especially helpful in vertical installations. QEP Horseshoe Shims are easy to clean, reusable, and packaged in a convenient recyclable pail containing 200 spacers.
Recommended to install large format tile, ideal for spacing and aligning marble, granite, and stone
Injection molded for dimensional accuracy, designed for use in horizontal and vertical installations
Designed to give a uniform grout joint appearance to tile installation
Easy to place, take out and clean, reusable shims in a convenient recyclable pail
Precision-cut for accuracy. Evenly space wall or floor tiles with professional results.
Precision cut for accuracy
Evenly space tiles for uniform grout lines
Provide quick, professional looking results
Works with all sizes of ceramic tile, porcelain, stone and marble
1/18 IN. TRADITIONAL FLEXIBLE TI
For cutting ceramic, porcelain and glass tiles
Tungsten carbide scoring edge for long cutting life
Replacement part
Fits QEP 10221Q and other manual cutters
QEP Tile Wedge Spacers support tile and stone on vertical applications to help ensure wall tile is level during installation. The unique shim-like design allows wedges to be pushed in or pulled out to adjust the position of tile up to 1/8 in., while also holding the tile in place. Leveling adjustments are fast and easy, from your first row to your last.
Position between wall tiles to ensure level horizontal grout lines during installation
Flexible, soft plastic design for easy maneuvering in tile joints
May also be used vertically at wall corners to maintain even spacing
Reusable spacers may be used over and over again
MD SPACER TILE 3/8 INCH 50/BAG
Heavy-duty extruded aluminum base will not break, crack or chip. Ball bearing carriage-smooth trouble-free operation. Chromed steel rails.
MD TILE CUTTER/HAND CUTTER
This minimal-expanding polyurethane foam with low-pressure build can help lower energy bills by forming a durable, airtight and water-resistant seal between a window or door frame and its rough opening
Comes with NEW SMART DISPENSER Straw
No drips, less mess - foam stops where you stop
Reusable for up to 30 days - use again and again
Precise, greater control
Soft & flexible, won't bow window frames
Offers greater insulation value than chinked fiberglass or caulk
The danger tape provides a durable tape with bold lettering for an easy-to-read message from a distance.