Cabot? Semi-solid deck and siding stains are deep-penetrating linseed oil-based stains that provide long-lasting beauty and wood protection, highlight the natural beauty of the wood's texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot? deck and siding stains are extremely durable and help protect wood against the sun's damaging ultraviolet rays.

This ultra-clear, high gloss finishing epoxy is ideal for home improvement and craft projects. FAMOWOOD glaze coat is a pour-on epoxy coating that can be used on most surfaces rough or smooth, stained or painted. It's great for coating tables or bar tops, preserving photographs or imbedding decorative items. Just one coat equals 70 coats of varnish.

Cabot? Wood toned deck and siding stain is specially formulated with a unique blend of resin and oil to provide a great natural finish for bare wood. This distinctive product comes in five natural tones that not only sustains the natural beauty of exterior wood, it also provides excellent wood penetrating protection against the sun and all damaging weather elements. It's water-repellent, to keep moisture out and guard against warping and checking, plus it's mildew resistant. Easy to apply requiring just one coat, Cabot? wood toned deck and siding stain slightly darkens wood when first applied leaving a flat and translucent finish. The finish then slowly weathers with time to a natural wood hue depending upon the color of product chosen and the particular wood type on which it was applied.

Minwax? Wood Finish? is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily and penetrates deep into the pores of the wood.

Minwax? Wood Finish? is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily and penetrates deep into the pores of the wood.

Cabot? solid color decking stains are extremely durable exterior stains for use on all wood decking, outdoor furniture and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water-repellent and fade resistant. Solid color stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition.

WOODLIFE? COPPERCOAT? Green wood preservative is a multi -purpose, EPA-registered, insecticidal wood preservative designed to protect exterior untreated or pressure-treated wood in below ground, ground contact, fresh water contact or above ground installations. COPPERCOAT? prevents attack from termites and other wood boring insects while protecting against rot and decay. Its anti-wicking property resists moisture absorption through end cuts for greater control of dimensional warping, splitting and end-checking. Plus, its paintable/stainable formula makes this product an excellent preservative primer for wood roofing, millwork and trim.

Refresh your ceilings the fast and easy way with RUST-OLEUM ZINSSER? ceiling paint - paint and primer In one. This advanced, low-VOC formula instantly hides and seals tough stains while providing long term mold/mildew protection. All with just one coat.

Minwax? Water-based Helmsman? spar urethane is a crystal-clear, water-based finish that is specially formulated to protect wood against nature's toughest conditions.

Cabot Wood stain enriches the appearance of unfinished wood. This deep-penetrating tung oil formula provides ultimate color control to ensure beautiful results. Formulated with unique ColorFast? technology, this premium stain remains fade-resistant for long-lasting beauty.

WATCO? Teak oil is specifically formulated for dense woods such as teak, rosewood or mahogany. WATCO? teak oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. It takes less than an hour to treat your wood with WATCO? teak oil, simply brush or wipe-on and wipe-off. WATCO? teak oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using.

Cabot? Australian Timber Oil? for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian Timber Oil? penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian Timber Oil? delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV-absorbing surface rich with color and dimension. The result after years of development is an advanced technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.

Minwax? Wood Finish? is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily and penetrates deep into the pores of the wood.

WATCO? Rejuvenating oil restores beauty, warmth and luster to previously oil-finished surfaces. Apply to furniture, trim, paneling or any wood interior surface. Cleans, penetrates and rejuvenates in 10 mins. Please read product labels for additional directions and precautions before using.

WATCO? Lacquer clear wood finish is the finest brushing lacquer available. WATCO? Lacquer fills in the pores of most wood types eliminating the need for wood filler. Apply to furniture, doors, cabinets and paneling for a crystal-clear, durable wood finish. Dries in 30 mins and does not require sanding between coats. Please read product labels for additional directions and precautions before using.