TANK WELLMATE 47 GAL.

WellMate's WM-20 WB tank features corrosion-proof composite construction that require little or no maintenance, plus their light weight makes them easier and less costly to install. All materials meet stringent U.S. Requirements for water components and are NSF and/or FDA listed materials. WellMate continues its tradition of excellence by offering features and benefits steel tanks cannot match. These rustproof WellMate pressure tanks are made with blow molded, fiberglass wrapped, seamless construction. They won't rust, dent, or come apart at the seams because there are no seams, and a rugged base is included. Full five-year limited warranty with a one year replacement labor allowance. This tank now features the quick connector that snaps securely into place and is retained by an H-clip. See the photos below. Note: All tanks are pre-pressurized at 38 PSI, and should always be set 2 PSI below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 PSI differential between cut in and cut out. Product Features Inner liner: blow-molded polyethylene. Outer shell: Filament wound with fiberglass roving and epoxy resin. Bladder: Heavy-gauge polyurethane (Separates air and water). Bottom inlet/outlet assembly: high-impact PVC Air connection: Standard tire valve. Pre-charge: 40 PSI Maximum operating pressure: 125 PSI Maximum temperature: 120 degrees Fahrenheit Connection: 1-1/4" NPTM (Male pipe thread) Quick Connect Manufacturer WellMate Model # WM-20WB Material Fiberglass Capacity 60 gallons Connector 1 1/4" NPTM Drawdown @ 40/60 PSI 16.2 gallons Drawdown @ 30/50 PSI 18 gallons Shipping Weight 55

TANK WELLMATE 88 GALS

WATER TANK OT 2000 GAL BLACK

WATER TANK CL/TOP 2000GAL BLK

WATER TANK ROUND BLUE 1000

Snyder 550 Gallon Vertical Water Storage Tank is a green stationary water storage tank. This vertical water storage tank is used in a variety of water storage applications such as rainwater collection, well water storage, fire suppression, and bulk water delivery storage.

This plastic vertical water storage tank is constructed with rotationally molded polyethylene resin. It's seamless construction makes it durable and resistant to cracks, chips, and ruptures. The poly tank was made with FDA approved resin that complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2 for the storage of potable water. It's made with UV inhibitors that help protect liquid contents from direct sunlight - making it ideal for both indoor and outdoor use.

The Snyder 550 gallon vertical water storage tank has a specific gravity rating of 1, making it safe for potable water storage. It features a 18" threaded vented manway, 1.5" polypropylene female npt bulkhead fitting inlet, and 2" polypropylene stainless steel bolted fitting outlet.