-20 to 300 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.

PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow

PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow

The GF Piping Systems type 375 two-piece ball valve has a PVC (polyvinyl chloride) body that weighs less than valves made from metals, and it has EPDM (ethylene propylene diene monomer) O-rings for good resistance to weathering, ozone, UV, electricity, oils, water, steam, and some solvents. The PTFE (polytetrafluoroethylene) seat resists chemicals, moisture, and high temperatures. This valve connects two pipes going in the same direction and has true union connections that allow in-place valve replacement. It has a full port for reduced friction; the inner diameter of the valve is the same as the inner diameter of the pipes it connects to enable maximum operating efficiency. This valve includes socket weld connections with an internal recess on each inside diameter to allow for a smooth bore and better fluid flow. Valves in sizes 3/8" through 2" also include National Pipe Taper (NPT) threaded connections, which create tighter seals than straight threads. It is pressure rated to 232 pounds per square inch (psi) at 72 degrees Fahrenheit (F) using the socket connections and is pressure rated to 150 psi at 72 degrees F using the NPT threaded connections.

PVC body for less weight than valves made from metals
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Rated for 150 PSI at 73Deg. F., for use with cold-water applications, white color, tpv seats, NBR O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-Free compliant.

VALVE BALL THREE WAY 1